German Hanger Tent
German Hanger Tents on Rent - Mumbai & Pan India
A German hanger tent removes both limits - column-free, clear-span temporary coverage from 20 ft to 200 ft width (6 m to 60 m), open end to end for racking, staging or seating.
Types of Our Rental German Hanger Structures
We hire out 3 German hanger structure types: aluminium hangers for events and exhibitions, MS hangers for industrial storage, and expo-configured hangers for trade fairs. Frame choice follows the load you hang, the surface you build on, and the hire duration.
Aluminium German Hanger Tent
- Specification Extruded aluminium alloy frame, 20–200 ft span, 4.5–7 m eave height.
- Structural Advantage The modular aluminium hanger tent holds 15–20 kg/m² of suspended service load for lighting rigs and HVAC ducting.
- Best For Corporate events, trade shows and temporary commercial space.
MS Hanger Tent (Mild Steel)
- Specification Mild steel frame rated to 50 kg/m² suspended load.
- Structural Advantage Steel sections carry heavier point loads and suit hire periods running past 12 months.
- Best For Industrial storage - forklift operation, material racking and heavy equipment cover.
Exhibition Tent & Expo Structures
- Specification 3×3 m to 3×6 m booth partitions, mezzanine support and 3-phase electrical across 130+ ft spans.
- Best For National trade fairs and expos. We regularly deploy expo German hanger setups in Delhi and Ahmedabad.
Aluminium or MS Hanger - How to Choose
| Selection Factor | Aluminium Hanger | MS Hanger |
|---|---|---|
| Suspended load capacity | 15–20 kg/m² | 50 kg/m² |
| Typical hire duration | 7 days to 12 months | 6 to 24 months |
| Erection speed | Faster - lighter sections | Moderate |
| Corrosion behaviour | Naturally corrosion-resistant | Painted or galvanised finish |
| Suits |
|
|
Core Industries & Event Types for German Hangers
German hanger tents serve 6 industrial sectors and 3 event categories across India. The same clear-span structure covers a cement godown, a steel stockyard, a 5,000-guest panthal or a Delhi trade fair - column-free, weatherproof and removable at the end of the season or event.
Industries Served
- Cement & Aggregate Bagged cement and clinker storage; MS hanger, 50 kg/m² capacity, dust-controlled.
- Steel & Metals Coil, billet and finished-stock cover at plants and stockyards.
- Sugar & Agriculture Crush-period and harvest storage; monsoon-protected godown spans.
- Pharmaceutical & FMCG Dry storage during plant expansion, audits and shutdowns.
- Automobile Vehicle stockyards, dealership overflow and pre-delivery inspection bays.
- Warehousing, Logistics & Ports Surge fulfilment capacity, port aggregate cover and bonded overflow.
Hire durations run 30 days to 24 months across Maharashtra, Gujarat, Odisha and NCR. For enclosed racking-grade cover, compare our warehouse and storage shed option.
Event Types
- Exhibitions & Trade Fairs Expo German hangers for fairs in Delhi, Mumbai, Ahmedabad, Bangalore and Kolkata, with 3×3 m to 3×6 m booths, 3-phase power and 7–30 day durations.
- Sports Events & Tournaments Badminton (7 m clear height), volleyball (6 m) and kabaddi structures, with ground anchors that keep the playing surface intact.
- Auto Launches & Corporate Events Dealership launches, product reveals and corporate offsites needing branded, column-free floor space.
For curved-roof alternatives at similar spans, see our dome shed range.
German Hanger Sizes & Specifications
German hanger sizes run from 20 ft to 200 ft clear-span width (6 m to 60 m), each extendable in 5 m bay increments to any required length. Select width by floor area and internal clearance. The 100 ft / 30 m span is our most-hired size for weddings and exhibitions.
| German Hanger Size (Width) | Metric Span | Extends In | Typical Application |
|---|---|---|---|
| 20–40 ft | 6–12 m | 5 m bays |
|
| 130 ft | 40 m | 5 m bays | Mid-size exhibitions, auto displays |
| 165 ft | 50 m | 5 m bays | Large trade fairs, conventions |
| 200 ft | 60 m | 5 m bays | Mega events and wide-span industrial storage |
Materials & Build Specification
| Component | Attribute | Value |
|---|---|---|
| Frame - aluminium | Section type | Extruded aluminium alloy profile, bolted connections [VERIFY: confirm alloy grade - 6061-T6 / 6082-T6] |
| Frame - MS | Section type | Mild steel truss and column, designed to IS 800 |
| Purlins | Material | Aluminium purlins tying rafter to rafter |
| Roof & wall fabric | Composition | PVC-coated polyester membrane |
| Roof & wall fabric | Weight | 650–900 GSM [VERIFY against current inventory] |
| Roof & wall fabric | Treatment |
|
| Bay module | Increment | 5 m, repeatable to any length |
| Eave height | Range | 4.5 m to 7 m |
| Wind design basis | Standard | IS 875 basic wind speed by zone |
| Sidewall options | Types |
|
Wind design follows IS 875, the Bureau of Indian Standards code governing wind loads on buildings and structures. Coastal and high-wind installations are assessed against the site’s zone wind speed before the frame configuration is fixed.
German Hanger Installation, Anchoring & Site Requirements
A German hanger shed needs a level compacted surface, clear vehicle access and a defined anchoring method - no foundation casting. Our team confirms all 3 at survey stage, then erects the frame, fits the membrane and hands over a ready structure.
Site Conditions We Work With
| Ground Surface | Anchoring Method | Site Preparation |
|---|---|---|
| Firm soil / murum | Ground stakes driven at each leg | Level and compact to ±50 mm |
| RCC slab / paved yard | Chemical anchor bolts or base plates | Confirm slab thickness at survey |
| Interlocking pavers | Concrete ballast blocks at each leg | Lift pavers where bolting is preferred |
| Beach sand / soft ground | Ballast blocks with spread base plates | Additional bay bracing added |
Erection & Dismantling Timeline
- Site survey Measurement, ground assessment and wind-zone check.
- Layout marking Bay grid set out, leg positions fixed.
- Frame erection Rafters assembled at ground level, then lifted bay by bay.
- Membrane fitting Roof sheets pulled through, gable and sidewalls tensioned.
- Handover Anchoring verified, structure signed off.
A 100 ft × 100 ft German hanger typically erects in 3–4 working days and dismantles in 2. Larger spans and multi-structure sites are scheduled bay by bay.
Why choose us
Why Choose Shivji Valji for German Hangers
Over 1,000 projects across India rely on Shivji Valji German hangers for events and seasonal storage. One contractor handles survey, erection, dismantling and site clearance - backed by 115+ years of structural experience since 1910 and round-the-clock on-site support.
1,000+ Projects Completed
Established 1910
14-City Pan-India Presence
24/7 On-Site Support
Own Erection Crew
Our German Hanger Tent Rental Coverage - Pan India Service
Shivji Valji Sheds Pvt. Ltd. supplies and erects German hanger tents in 14 cities across India. Our deployment network reaches tier-2 exhibition cities, coastal event venues and industrial belts.
Cities and Regions We Serve
- Mumbai & Maharashtra
- Delhi & NCR
- Bangalore
- Pune
- Chennai
- Hyderabad
- Ahmedabad & Gujarat
- Kolkata
- Goa
- Lucknow
- Bhubaneswar & Odisha
- Coimbatore
- Kerala
- Chandigarh
Coastal installations - Goa, Kerala and Chennai - include a wind load assessment per IS 875 as standard. MS hanger variants are stocked for industrial work in Odisha, Gujarat and NCR. During the June–September window, pair the hanger with our monsoon tarpaulin shed covers for perimeter protection.
Get a German hanger sized, erected and dismantled around your dates, span and site conditions Enquire now - confirm availability for your city and date
Questions
Frequently Asked Questions
What is a German hanger tent and how is it different from other event tents?
A German hanger tent is a column-free, clear-span temporary structure built on a bolted aluminium or steel frame, spanning 20 ft to 200 ft. The clear-span design keeps the entire floor plate usable. That gives it more workable area than a conventional marquee or pandal at the same footprint, which is why it is the standard choice for large events and exhibitions across India.
What sizes are available for rent?
5 clear-span widths: 20–40 ft, 100 ft, 130 ft, 165 ft and 200 ft - equivalent to roughly 6–12 m, 30 m, 40 m, 50 m and 60 m. Each extends in 5 m bay increments. The 100 ft span is the most hired, fitting 600 theatre-style seats, a 24-booth exhibition or a 400-cover wedding reception in one unobstructed structure.
How far in advance should I book?
Allow 4–6 weeks for spans up to 100 ft and 8–12 weeks for 130 ft and above. October to February is peak season across India, so early confirmation secures your dates and your preferred span.
Do you provide installation and dismantling?
Yes. Every hire includes site survey, full erection, post-event dismantling and complete site clearance. Our trained crew manages the entire process from first measurement to final handover.
Is rental available outside Mumbai?
Yes. We supply and erect across 14 cities - Mumbai, Delhi/NCR, Bangalore, Pune, Chennai, Hyderabad, Ahmedabad, Kolkata, Lucknow, Goa, Bhubaneswar, Coimbatore, Kerala and Chandigarh. Regional crews handle installation locally.
Can a German hanger be used as a temporary warehouse or industrial shed?
Yes. The MS hanger variant carries 50 kg/m² of suspended load and supports forklift movement, pallet racking and machinery cover. Industrial hires typically run 6 to 24 months, and the structure relocates to another site at the end of the period.
